Share on Facebook

Engine Performance -- Get engine drivability problems (hard starts, rough idling, stalling, diminished power, etc.) corrected. Replace dirty filters (air, fuel, PCV, etc.).

Fuel -- Ensure maximum power and performance with FuelKare™ fuel system cleaner.  The FuelKare™ system pulse cleans the fuel rail and fuel lines; removes soft carbon buildup in the combustion chamber, induction passages, on the intake valves, and in the intake manifold. A two stage process, engine off, engine on, ensures a thorough and effective cleaning. The result is restored engine performance and reduced vehicle emissions and fuel consumption.

Oil -- Change your oil and oil filter as specified in your manual; more often (every 3,000 miles or so) if your driving is mostly stop-and-go or consists of frequent short trips.

Cooling System --The cooling system should be flushed and refilled as recommended. The level, condition, and concentration of the coolant should be checked periodically. (A 50/50 mix of antifreeze and water is usually recommended.) The tightness and condition of drive belts, clamps, and hoses should be checked by one of our pros.

Air Conditioning System -- When summer's brutal heat beats down it is always nice to have the luxury of Ice Cold air conditioning.  Whether your A/C is performing poorly or not working at all, our technicians can diagnose and repair most any A/C system.  If needed we can make custom replacement hoses, and repair A/C on fleet/heavy duty vehicles as well.

Battery -- The only accurate way to detect a weak battery is with professional equipment. Routine care: scrape away corrosion from posts and cable connections; clean all surfaces; re-tighten all connections. If battery caps are removable, check fluid level monthly.

Lights -- Inspect all lights and bulbs; replace burned out bulbs; periodically clean road grime from all lenses. To prevent scratching, never use a dry rag.

www.rawhide.org